Masonry repair
Cracked brick and blown-out mortar joints are repaired before water gets into the cracks.
Masonry Repair
Chimney Fire Damage Repair Jenkintown, PA
A chimney fire in a Jenkintown home can crack flue tiles, warp the damper and cap and loosen mortar, and most of that damage can be repaired or the flue relined so the chimney can safely contain heat and smoke again. Dial (267) 633-0240 to talk with a local sweep about the damage.
A chimney fire that is still burning calls for 911, not a sweep, and everyone should leave the house. Once the fire is out, the next job is finding out what it did to the chimney. A burning flue can reach temperatures high enough to crack clay tile and warp steel.
Some chimney fires roar like a freight train, but many burn slowly and quietly. Slow fires do not always produce flames from the top of the chimney, but they can still crack the liner. Signs afterward include puffy, honeycombed creosote, flakes of creosote on the roof or ground, a warped cap or damper and cracks in the masonry.
After a chimney fire, the industry standard is a Level 2 inspection, which includes a video scan of the flue. The camera shows exactly which tiles cracked and how badly. The repair plan comes straight from what that inspection shows.
If the problem goes deeper than it first looked, a Jenkintown chimney sweep may also recommend chimney inspection or chimney liner installation.
Need chimney fire damage repair in Jenkintown? Call (267) 633-0240 to talk to a local chimney sweep.
Call nowThe process
What happens after a chimney fire
The process moves from cleaning to inspection to repair, in that order.
Hold off on fires
No fires go in the appliance until the inspection is done. Damage from one fire raises the risk from the next.
Clear the deposits
Leftover creosote and debris come out first. Any glazed deposits left behind are noted.
Camera scan
A camera travels the full length of the flue to record every tile and joint. That record often matters for an insurance claim.
Repair the liner
Lightly damaged clay tile can sometimes be restored with a resurfacing system that fills cracks and missing joints. The camera footage decides which option makes sense.
Swap warped parts
Warped dampers, caps and stovepipe are replaced. Exterior brick and the crown get any needed repairs.
Final check
The technician confirms the system is sound before any fire is lit. Burning dry wood and annual sweeping keep creosote down.
What is included
What fire damage repair covers
Joint restoration
Clay flues with minor cracking may be resurfaced instead of relined if the tiles are still in place.
Stainless steel liner
The damaged flue gets a new continuous liner with a cap at the top.
Creosote removal
All remaining deposits are cleared including any glazed patches.
Post-fire inspection
A full camera scan of the flue plus a check of the attic, roof and accessible areas before any repair is planned.
Related service
Chimney Fire Inspection Jenkintown, PA
A chimney fire inspection is a Level 2 inspection done after a known or suspected fire in the flue. The scan shows tile cracks, gaps in joints and any spot where heat may have escaped the flue. In rare cases, damage that the camera cannot fully explain calls for a Level 3 inspection.
When you call (267) 633-0240 from Jenkintown, describe what you heard or found, such as a roar, puffy creosote or debris in the yard. Insurance companies often ask for an inspection report before approving repairs, so keep everything on record. Hold off on any fires until the chimney is cleared.
Local help
Chimney Fire Damage Repair Near Me
Homes around Jenkintown that burn wood regularly are the ones most likely to see a chimney fire. Across Jenkintown and communities nearby including Wyncote, Glenside, Elkins Park and McKinley, a mix of older masonry chimneys and newer stove installations means fire damage can look very different from house to house, and a damaged flue is far better found in an inspection than by the next fire.
Searching for chimney fire damage repair near me from Jenkintown or Wyncote, Glenside, Elkins Park and McKinley? Call (267) 633-0240 to talk to a chimney sweep who works in your part of town.
What the local climate does to a chimney
Cold winters keep fireplaces, wood stoves and oil burners working for half the year or more. Masonry takes the worst of it from the freeze and thaw cycle: rain and melting snow soak into the crown and joints, then freeze and push them apart, and each winter widens the cracks a little more. Nor'easters drive rain sideways into flashing and mortar that looked fine in summer. That is why chimney cleaning in Jenkintown is usually booked in the fall, before the first cold night.
Why call
Why not wait
Smaller repairs
Small chimney problems caught early usually stay small repairs.
Sweeps who know Jenkintown
Chimney sweeps in Jenkintown know the chimneys and fireplaces common in local homes.
Clear next steps
Ask your questions before you agree to anything.
Chimney Fire Damage Repair FAQ
How do I file an insurance claim for chimney fire damage?
Your policy decides that, and the place to start is a call to your insurer. Ask the sweep for a written report and copies of the video. Contact the insurance company before major repairs begin.
What causes a chimney fire?
The usual cause is creosote buildup that ignites from the heat of a fire below. Unseasoned wood, low smoky fires and skipped cleanings speed it up. Annual inspection and sweeping, as NFPA 211 calls for, are the best prevention.
Is it safe to use the chimney after a small chimney fire?
A chimney that has had a fire should not be used until a sweep has checked the flue with a camera. A single fire can crack flue tiles, and the next fire can then reach the framing through those cracks. After repairs, most chimneys can be used safely again.
What should I do during a chimney fire?
The signs of an active chimney fire include a roaring noise, popping and thick smoke from the chimney. The right move is to leave the house with everyone inside and call 911. Do not use the fireplace again until a sweep has inspected it.
How do you repair a flue liner after a chimney fire?
The answer comes from the video inspection. Widespread cracking in a clay flue usually means relining with stainless steel. Minor cracks may be repairable with a ceramic resurfacing material.
More questions? Call (267) 633-0240
Related services
Chimney Inspection
An annual look at the flue, firebox, damper, crown and cap so you know whether it is safe to light a fire.
Learn moreChimney Liner Installation
Putting a new liner in the flue for safer venting and a stronger draft.
Learn moreCreosote Removal
Removing flaky, crunchy and glazed creosote from chimney flues before it can fuel a chimney fire.
Learn moreChimney Liner Repair
Repairing cracked clay flue tiles, open joints and damaged liners after a camera scan shows where the damage is.
Learn more
Looking for something else?
See all chimney servicesNeed chimney fire damage repair in Jenkintown, PA?
Call now for Jenkintown chimney fire damage repair and help in the towns around it.
(267) 633-0240
Free to call. No forms to fill out.